Powersystems are delighted to have been awarded the electrical works contract for the 16.1 MW Hendy Onshore Wind Farm. The wind farm will be located on a site of 150 hectares near the village of Penybont, situated south west of Llandegley, Llandrindod Wells, Wales.

The 66 kV project works at Hendy Wind Farm will see the high voltage electrical engineers Powersystems; design, supply, install, commission and set to work all the electrical works between the point of connection to the Distribution Network Operator (DNO) network. The Point of Common Connection (POCC) for Hendy Wind  Farm 66/33kV substation will be situated within the WPD 66kV substation.

Powersystems will design, procure and install the 66kV and 33kV equipment for the electrical works project, this is expected to be a 40-week construction programme from start to finish.

The wind farm will comprise of 6no. Enercon E82 wind turbines plus 1no. Vestas V80 wind turbine; these with a Total Installed Capacity (TIC) of 16.1 MW. One turbine (the Vestas V80) is already installed and this will be connected into the overall wind farm system.

Powys Council granted planning consent for the Hendy Wind Farm for the turbines at 2.5 MW with a maximum hub height of 69m and maximum tip height of 110m, associated works, infrastructure, compound and buildings.

Hendy Wind Farm could generate enough energy to meet the demands for around 9,800* homes every year.

It is expected that Hendy Wind Farm will bring economic benefits to the area using materials sourced materials locally and using local companies during construction. Between £4.5m and £6.75m could be spent with local businesses during the construction period.

Wind energy isn’t just good for the environment, the construction of Hendy Wind Farm will deliver meaningful benefits for the local economy and community. A community fund will be set up based on £5,000 per MW per annum, which will deliver over £2m of investment in the local area throughout the lifetime of the wind farm.

As part of building the UK carbon free future, Powersystems proudly support the design, installation, and commissioning of climate restoration technologies with connectivity in all renewable sectors.
Powersystems are powering the UK to a green recovery, with 5 GW of installed green energy as they play their part helping to decarbonise the National Grid.

Working with partners, delivering sustainable power solutions, proudly the Powersystems high voltage specialist team have connected 27% of all U.K. onshore wind farms.

* This is based on Renewable UK and the following calculation Operational MW x 8760 (number of hours in a year) x 0.2782 (the capacity factor for both on & offshore wind) / 4192 (UK average domestic household consumption in kWh) and it should be noted that this is an estimate and not based on site specific data.

Pin It on Pinterest

Share This

Share this post with your friends!